Equipment

Securement that matches the load.

Everything here is quoted rather than listed at a price. Chain is rated to a weight, a tarp is cut to a trailer and a track layout is drawn to a deck — so we ask what you are hauling and price the thing that actually fits it.

Request a quote

Securement

Grade 70 Chain & Binder Kits

Matched transport chain and ratchet binders, assembled to your WLL.

Grade 70 transport chain with grab hooks on both ends, paired with ratchet or lever binders rated to match. Sold as a matched kit because the weak point of a tie-down assembly is whichever component is rated lowest, and mixing a heavy chain with a light binder throws the whole assembly rating away.

Grade 70 Chain & Binder Kits specifications
Chain sizes	5/16 in, 3/8 in, 1/2 in
Working load limit	4,700 lb / 6,600 lb / 11,300 lb respectively
Standard lengths	10 ft, 16 ft, 20 ft — cut to length on request
Binders	Ratchet or lever, rated at or above the chain WLL
Marking	Grade-embossed links, as required for a DOT roadside check

Flatbed steel
Machinery and equipment hauls
Coil and plate

Tell us the heaviest article you secure and how many kits per truck.

Quote this

Securement

Winch & Ratchet Strap Programs

Fleet-quantity webbing with a replacement cadence, not a one-off box.

Four-inch winch straps and two-inch ratchet assemblies in the hardware your trailers already run — flat hook, chain anchor, wire hook, or sewn loop. Set up as a standing program with a re-order interval, because webbing is a wear item and a fleet that buys straps reactively is a fleet running frayed ones.

Winch & Ratchet Strap Programs specifications
Winch straps	4 in × 27 ft / 30 ft, assembly WLL 5,400 lb
Ratchet assemblies	2 in × 27 ft, assembly WLL 3,333 lb
End fittings	Flat hook, wire hook, chain anchor, delta ring, sewn loop
Webbing	Polyester, abrasion-resistant weave
Labelling	WLL tag on every assembly

Flatbed and step-deck fleets
Lumber and building products
Van floor loads

How many trailers, which end fitting, and how often do you replace?

Quote this

Tarps & Covers

Steel & Lumber Tarps

18 oz vinyl, sized to the trailer rather than to a catalogue.

Heavy vinyl tarps built to the deck they cover. The weight matters more than the price per tarp: a light tarp is cheaper on the invoice and gets replaced twice as often, and a tarp that tears mid-run is a claim, not a saving. Reinforced D-rings and double-stitched hems throughout.

Steel & Lumber Tarps specifications
Material	18 oz vinyl-coated polyester
Steel tarps	16 ft × 27 ft, 6 ft or 8 ft drop
Lumber tarps	24 ft × 27 ft, 8 ft drop, two- or three-piece sets
Hardware	Rust-resistant D-rings, reinforced corners, double-stitched hems
Options	Smoke tarps, machinery tarps, custom sizes

Flatbed steel and coil
Lumber and drywall
Weather-sensitive freight

Give us trailer length, deck width and the drop you need.

Quote this

Decking & Shoring

E-Track & Shoring Systems

Rail, fittings and beams specified as one layout, not parts in a bin.

Horizontal and vertical E-track with the fittings, straps and shoring beams that run in it. Quoted as a trailer layout — how many rails, at what height, with which fittings — because ordering rail without matching the fitting count to the way loads are actually built is how half a kit ends up unused.

E-Track & Shoring Systems specifications
Rail	Horizontal and vertical E-track, 2 ft / 5 ft / 10 ft sections
Finish	Painted or galvanised
Fittings	Spring, O-ring, rope tie-off, strap and bar ends
Beams	Aluminium and steel shoring beams, adjustable
Supplied as	Per-trailer layout with fastener count

Dry van and reefer decks
LTL and multi-stop loads
Palletised freight

Trailer length and type, and how many rails per side you run.

Quote this

Protection

Dunnage Bags & Void Fill

A consumable program sized to your lane, billed per run.

Inflatable dunnage bags that fill the gap between pallets so the load arrives as it was built. A consumable, so it is set up as a standing program with the size and level fixed to your typical void rather than re-specified every order.

Dunnage Bags & Void Fill specifications
Levels	Level 1 through Level 5, by void width and load weight
Common sizes	36 in × 84 in, 48 in × 96 in, 48 in × 120 in
Construction	Poly-woven and kraft-ply
Inflation	Standard valve, compatible with common inflators
Supply	Per-pallet-count program with a re-order trigger

Palletised dry van freight
Beverage and canned goods
Long-haul lanes

Typical void width, pallet count per load, and loads per week.

Quote this

Moving

Moving Blankets & Furniture Pads

Bulk pads by weight class, with optional branding.

Furniture pads in the weight classes that matter for a moving operation: a light pad for volume and a heavy pad for the pieces that generate claims. Bought by the dozen, and available with your own binding colour or a printed edge so pads come back from a job.

Moving Blankets & Furniture Pads specifications
Standard size	72 in × 80 in
Weight classes	Economy, standard and premium, by lb per dozen
Construction	Woven cotton/poly face, non-woven fill, bound edges
Packing	Sold by the dozen, compressed bales available
Branding	Custom binding colour or printed edge, minimum quantities apply

Household goods movers
Office relocations
White-glove delivery

How many dozen, which weight class, and do you want branding?

Quote this

On the numbers above

Working load limits and dimensions are the standard published figures for each product class and are given so you can check that a kit suits your load before you call. The rated capacity of the assembly you actually receive is what is marked on its tag — always work to the tag, and never above the lowest-rated component in an assembly.